But kettle bells are part of a complicated and fragile supply chain, one that's a microcosm of a global economy currently in crisis. Rogue, which did not respond to an interview request for this story, captioned the post to its two million followers with: “We know we are behind, and we are working around the clock to clear the backlog.”
Most of the kettle bells that you could have ordered before March 13 were; it's probably not surprising that, in 2020, there are few American foundries eagerly pumping out large bulbs of iron. But Rogue, in a moment of massive demand and with a supply chain in chaos, has turned to Rhode Island's Cumberland Foundry, a company with roughly 40 employees.
Those Instagram pictures it posted were from Cumberland, a tacit acknowledgment that, at least temporarily, the system has shifted: Rogue needs professionally crafted kettle bells wherever it can get them, even if it has to pay higher, American-sized wholesale prices than what they and other companies (including Rep Fitness) are getting overseas. Cumberland isn’t automated, and its president, Tom Lucchetti, estimates that it takes a full day to produce 40 to 50 kettle bells (with Rogue handling last steps, like painting the bells).
Back then, the owner of a Rhode Island gym was ordering products from exercise gear conglomerates, which have their kettlebellsmade overseas. The gym had issues with the durability of those kettle bells —their two-piece designs had a steel handle that would often come loose, which is disconcerting when you’re holding 40 pounds of iron over your head.
A one-piece cast-iron kettle bell design emerged as the clear alternative model, and the gym owner enlisted nearby Cumberland to make it. The gym owner prototyped his kettle bells, then gave Cumberland the tooling—which would have cost $50,000 to $100,000 to create—so it could manufacturer his final cast-iron product.
“These huge companies are turning to a little mom and pop-type shop like us to get this product made because there’s no one else left in the U.S. who can do it,” Lucchetti says. In Georgia, George Boyd Jr. is the vice president of Golden's’ Foundry and Machine Company, one of the largest foundries left in the U.S. Golden's’ makes long-haul truck parts, in addition to commercial items like cast-iron grills, which Boyd says are “selling like hot cakes” right now.
Golden's’ dabbled with limited runs of dumbbells once upon a time, but stayed out of the kettle bell business out of respect to their foundry friends up north. Golden's’ dumbbell experiment didn’t last, and Boyd is hesitant to take on fitness equipment-related projects without a commitment from the companies involved that they wouldn’t bolt back to China when the pandemic subsides.
“A lot of large American buyers say they care about everything, but at the end of the day, all they want to know is piece price,” Boyd says. “They certainly do have great foundries in China, but the reality is, the bulk of their production is not done by people who are paid living wages, and the work isn’t always done in environmentally friendly ways.”
“A lot of large American buyers say they care about everything, but at the end of the day, all they want to know is piece price.” Boyd hopes the sold-out kettle bell saga will open consumer’s eyes about the dismal state of manufacturing, amongst many other industries, in the U.S. and around the world.
“With these massive disruptions, I hope more people are thinking about, well, do we really want to have a logistical supply chain that stretches over half the globe ?” he says. UPDATE: This piece originally misstated the number of kettle bells that Cumberland Foundry can produce in a single day.
From Zoom raves to Instagram orgies, coronavirus isolation has meant a boom time for sex via screen. The kettle bell is an amazingly simple and versatile training tool.
Our bells feature a smooth comfortable handle, wide flat machined bottom for stability, and a black paint finish. A 16-kilogram (35 lb) “competition kettle bell” Arthur Saxon with a kettle bell, cover of The Text Book of Weight-Lifting (1910)The Russian girl (, plural girl) was a type of metal weight, primarily used to weigh crops in the 18th century.
They began to be used for recreational and competition strength athletics in Russia and Europe in the late 19th century. The birth of competitive kettle bell lifting or Gregory sport ( ) is dated to 1885, with the founding of the “Circle for Amateur Athletics” ( ).
Russian girl are traditionally measured in weight by Food, corresponding to 16.38 kilograms (36.1 lb). The English term kettle bell has been in use since the early 20th century.
Similar weights used in Classical Greece were the halter, comparable to the modern kettle bell in terms of movements. Variants of the kettle bell include bags filled with sand, water, or steel shot.
By their nature, typical kettle bell exercises build strength and endurance, particularly in the lower back, legs, and shoulders, and increase grip strength. The basic movements, such as the swing, snatch, and the clean and jerk, engage the entire body at once, and in a way that mimics real world activities such as shoveling or farm work.
Unlike the exercises with dumbbells or barbells, kettle bell exercises involve large numbers of repetitions in the sport, and can also involve large reps in normal training. Kettle bell exercises are in their nature holistic; therefore they work several muscles simultaneously and may be repeated continuously for several minutes or with short breaks.
This combination makes the exercise partially aerobic and more similar to high-intensity interval training rather than to traditional weight lifting. In a 2010 study, kettle bell enthusiasts performing a 20-minute snatch workout were measured to burn, on average, 13.6 calories/minute aerobically and 6.6 calories/minute anaerobically during the entire workout — “equivalent to running a 6-minute mile pace”.
When training with high repetitions, kettle bell progression should start out slowly to build muscle endurance, support the joints and prevent injury. Like movements performed with any exercise tool, they can be dangerous to those who have back or shoulder problems, or a weak core, when performed without proper education and progression.
They can offer improved mobility, range of motion, agility, cardio vascular endurance, mental toughness and increased strength. The following is a list of common exercises that are uniquely suited to the kettle bell for one reason or another.
A kettle bell exercise that combines the lunge, bridge and side plank in a slow, controlled movement. Keeping the arm holding the bell extended vertically, the athlete transitions from lying supine on the floor to standing, and back again.
As with the other slow exercises (the windmill, get-up, and halo), this drill improves shoulder mobility and stabilization. It starts lying on the ground with the kettle bell over the shoulder in a straight arm position, as in the top of a floor press, but with the other arm along the floor straight overhead.
The trainee then gradually turns their body away from the kettle bell until they are lying partially on their front. The kettle bell is held hanging in one arm and moved smoothly around the body, switching hands in front and behind.
Also called a front leg pass, this is a backward lunge, circling the bell around the front leg, returning to the standing position, and repeating. Like the slingshot, but the bell is swung forward until the arms are parallel to the ground.
Starting with the bell in the rack, the bell is pushed away to the side slightly, the swung down to the other side in front of the body, and reversed back up into the rack. A variation of the press where the other arm assists by pushing open palm against the ball.
Stand on one leg and hold the kettle bell with the opposite arm. By then lowering and raising the kettle bell you can work stabilization and power.
A press utilizing a bent-leg windmill position to lift heavier weight than is otherwise possible. One bell is rowed to the chest while maintaining the plank position, then returned to the ground and repeated with the other arm.
Alternatively performed with a single kettle bell, one arm at a time. This requires more control than an ordinary push up and results in a greater range of motion.
Feet may be elevated to increase the difficulty, until the trainee is performing a handstand push-up on the kettle bells. In any movement involving the rack or overhead position, the kettle bell can be held with the ball in an open palm (sometimes called the waiter hold) for a greater stabilization challenge, or for even more precise control and added grip challenge, the bottom-up hold, squeezing the kettle bell by the handle upside-down.
Holding a single kettle bell in the rack position bottom-up with two hands (“by the horns”) makes for goblet exercise variants. Conventional swing: The kettle bell is swung from just below the groin to somewhere between the upper abdomen and shoulders, with arms straight or slightly bent, the degree of flexion depends on the trajectory of the kettle bell.
Hang clean: The kettle bell is held in the rack position (resting on the forearm in the crook of the elbow, with the elbow against the chest), lowered to below the knees, and then thrust back up in to the rack. The kettle bell is held in one hand, lowered to behind the knees via hip hinge, swung to an overhead position and held stable, before repeating the movement.
Jerk: As a push press, but with two dips, for more leg assistance (as in the barbell clean and jerk) Thruster: A rack squat with a press at the top using momentum from the squat. Pistol squat: A single-leg squat with one leg held straight in front parallel to the ground, holding the bell in the goblet or rack position.
An easier variant for those with less hip mobility is to perform the squat parallel to a step or ledge, so that the foot of the free leg can dip beneath the pushing leg at the bottom. Carry: Walking with the kettle bell held in various positions, such as suitcase, rack, goblet, or overhead.
Row: While bent over anywhere from 45 degrees to parallel with the ground, the kettle bell is held hanging from a straight arm, pulled up to the hips or laterally, and lowered again. Keeping the bell arm vertical, the upper body is bent to one side and rotated until the other hand is touching the floor.
The single kettle bell version is called the suitcase walk. These build grip strength while challenging your core, hips, back and traps.
The kettle bell is swung from just below the groin to somewhere between the upper abdomen and shoulders, with arms straight or slightly bent, the degree of flexion depends on the trajectory of the kettle bell. The key to a good kettle bell swing is effectively thrusting the hips, not bending too much at the knees, and sending the weight forwards, as opposed to squatting the weight up, or lifting with the arms.
The one-arm swing presents a significant anti-twisting challenge, and can be used with an alternating catch switching between arms. Within those variations there are plenty more variations, some are, but not limited to: pace, movement, speed, power, grip, the direction of thumb, elbow flexion, knee flexion.
The kettle bell has more than 25 grips that can be employed, to provide variety, challenge different muscles, increase or decrease complexity, and work on proprioception. Competitive lifter (Greek) performing jerk with 32 kg kettle bells (rack position). Contemporary kettle bell training is represented basically by five styles.
Hard style has its roots in powerlifting and Gj-rykarate training, particularly hobo undo concepts. With emphasis on the “hard” component and borrowing the concept of time, the Hard style focuses on strength and power and duality of relaxation and tension.
Gregory, sometimes referred to as the fluid style in comparison to the Hard style, represents the training regimen for the competitive sport of kettle bell lifting, focusing on strength endurance. Juggling is a training style where the practitioner releases and catches the kettle bell with all manner of spins and flips around the body.
Kettle bell training is extremely broad and caters to many goals, some being, but not limited to: mobility, flexibility, cardiovascular endurance, strength, speed and power. The sport can be compared to what the CrossFit Games is to CrossFit, however, the sport has been much longer in existence, and is only recently gaining more popularity worldwide, with women participating as well.
One such example being Valerie Wazowski, who at age 52, was the first US female lifter in the veteran age category to achieve Master of Sport in 24 kg Kettle bell Long Cycle. ^ , «» .
« » “ ”, 22 August 2016 (with period photographs). 21 (1908), p. 505: “PEOPLE ALL OVER THE WORLD ARE USING SCHMIDT'S Celebrated 'MONARCH' DUMB-BELL, BAR BELL AND KETTLE BELL SYSTEM”; also spelled KETTLE-BELLS (with hyphen) in a 1910 advertisement for the “Automatic Exerciser”) ^ a b c Rathbone, Andy (2009-01-04).
“The kettle bell way: Focused workouts mimic the movements of everyday activities”. Blast Fat & Build Strength With Innovative Equipment!”
Journal of Bodywork & Movement Therapies 15 (2011): 542-544 ^ a b Iv ill, Laura (2008-11-22). “Exclusive ACE research examines the fitness benefits of kettle bells (PDF).
Journal of Bodywork & Movement Therapies 15 (2011): 125-127 ^ “Kettle bell Swing Vs. High Pull”. ^ “The Kettle bell Clean, Stop Banging Your Wrists | The Complete Guide”.