logo
Archive

Kettlebell Glute Bridge

author
Paul Gonzalez
• Wednesday, 18 November, 2020
• 6 min read

Reading Time: < 1minuteThis is a simple yet very effective exercise to work your glutes, hamstrings & core. Laying the kettle bell on your belly forces your abs to brace.

glute bridge kettlebell exercise glutes
(Source: womenwholiftweights.com)

Contents

Don’t focus on pushing your hips too high and go through your lower back. Lying on your back with your knees bent and feet flat on the floor, place the weight on your pelvic area.

Keeping your core tight, rise your hips up off the floor and thrust them as high into the air as you can, squeezing your butt at the top. Lower hips back down, but do not touch butt to the floor.

4 Weeks of Kettle bell and Yoga Workouts Video and Photo Movement Library Kettle bell training is an effective way to build total-body strength, and yoga flows will mobilize your hips and shoulders, increase your flexibility, and aid in recovery.

A goal that keeps cropping up with my clients is glute development because people want big, round butts. Sitting on your glutes for extended periods causes the brain to forget how to activate them.

You should be able to flex each cheek as easily as you can tap your big toe while your hamstrings remain completely relaxed. Sitting in chairs for extended periods, for years on end, pulls the pelvis into a posterior tilt.

bridges glute butt workout kettlebell exercises fitness bridge exercise glutes perfect gym workouts health sara booty thighs reps jamie each
(Source: www.womenshealthandfitness.com.au)

This means that in normal posture, the tail bone is a little tucked under and the lower back is flatter than optimal. People with this posture type almost always have an underdeveloped butt because when the pelvis is in this position the hamstrings will always cheat the glutes out of a job.

Optimally, the neck should flex first (to look at the object you’re picking up, say), then the hips, then the mid-back (thoracic spine) and only then, if the everyday task demands it would the lower back go into noticeable flexion×. When the lower back is first to flex, for the many times per day that you bend over, excessive compression of the lumbar disks is caused.

The glutes are required for locomotive activities such as running, but the overactive hamstrings become the prime movers therefore become very partial to injury. Before I’m criticized for suggesting that we’re supposed to bend like stiff robots, I want to clarify that all joints of the spine and hips flex a little to initiate all everyday bending or hinging patterns.

Whereas, for optimal safe movement, most of the flexion should come from the hips and thoracic spine, first. In a training environment (with exercises such as dead lifts and swings) flexing from the lower back first leads to disc damage.

When a lower back flexes and rotates that’s like the perfect storm for lumbar disc injury. Let’s use our time in the gym to make us better at real life and relearn good, strong movement and lifting patterns.

glute kettlebell bridge isometric leg single lowering
(Source: www.youtube.com)

“The posterior chain is meant to work synergistically and in unison with the other ten (or so) myocardial lines. Teaching one chain of fascia to work hard while the rest remain dormant is a violation of common sense.

Isolating the lower back, glutes and hamstrings while the feet are strapped in causes a neurological misfiring and a detriment to human movement. Patterning multiple reps of lumbar flexion eccentrically controlled by the lower back, especially for the chair-bound masses could very well lead to bulging disks in the future.

If the world changes and there’s suddenly a daily requirement for everyday people to hang over the side of a boat with a friend holding their feet and repeatedly pick penguins out of the water, our opinion on the functionality of the God will stay the same. Hold the kettle bell by the horns and rest your wrists on your pelvis so the hips (glutes) do the work.

The lower back is made up mostly of tonic, stability muscles that like to hold gentle isometric (same length) contractions all day long. They hold the vulnerable lower back in place while the powerful hips drive movement.

If these are asked to lengthen and shorten to create movement for the entire body injury tends to occur. Glutes, on the other hand, are physic prime mover muscles that like to produce powerful contractions for very short periods.

bridge glute leg kettlebell single position starting placed hip directly diagram
(Source: www.researchgate.net)

In order for the glutes to be the main driver during a hip hinge (as opposed to the hamstrings), the knees must flex to approximately 20-25 degrees. The pendulum swing also involves rotating at the bottom then scooping the knees forward.

This sends the kettle bell in an upward trajectory (required for the sport) and makes torso rotation, quads and hamstrings the main drivers for the movement, instead of the glutes. Inhale: break knees and drive butt back while keeping pelvic floor engaged.

At the top of every swing, stand as tall as can be and clench your butt, quads and hamstrings hard. The snatch is a swing, but the kettle bell ends in the overhead position instead of floating to chest height.

The most common problems with peoples’ snatches are: hip hinge too shallow, rotation is allowed, lack of shoulder ability to own the overhead position, hook-grip too weak to catch the falling kettle bell. It doesn’t take many glute swings, even with a light load, to make your butt feel like it’s about to explode.

The glute swing is one of the hardest of all exercises to perform safely because the risk of the swinger’s lower back flexing is so high. Lumbar flexion not only makes this dangerous, but ineffective because the lower back and hamstrings become the main drivers instead of the glutes.

bridge bench glute press kettlebell
(Source: www.youtube.com)

During hinge exercises where torso rotation is involved it’s critical for the lumbar spine to remain in a sagittal neutral position. When the lumbar spine flexes, these articular processes drift apart and rotation is allowed to occur.

Super simple and accessible, provided there’s a basic level of hip mobility in place. A high-value exercise that develops stable shoulders, a mobile mid-back, a strong torso as well as working the glutes and patterning a good hip hinge.

Plantar flexing the back ankle allows more range of motion for the hip therefore gets into the glute more. The fact that the other hip is extended helps keep an optimal pelvic posture for hitting the glute.

Exhale: keeping your body upright, drive your front heel down without using the back foot for help. Firing up the glutes reciprocally inhibits the hip flexors, which are usually super tight on most people.

Other Articles You Might Be Interested In

01: Appropriate Kettlebell Weight For Beginners
02: Gryf Do Kettlebell
03: Nome Do Kettlebell
04: For Kettlebell
05: Nutrition For Kettlebell Training
06: Nome Do Kettlebell
Sources
1 www.fab-ent.com - https://www.fab-ent.com/exercise/weights/cando-kettlebells/
2 en.wikipedia.org - https://en.wikipedia.org/wiki/Kettlebell