Or you can perform an entire workout with one kettle bell on the days you can’t make it to the gym. If you’re just starting out or you don’t have much cash, consider making your own kettle bell with items you might already have at home.
DIY kettle bells are easy and cheap to make, you can purchase everything you need at your nearest home improvement store or online. Ok seriously, dumbbells are good and do have their benefits, but a kettle bell can add an extra dimension to your workouts.
Isolating specific muscle groups Increasing strength Beginners learning to work out with free weights Versatile handle that allows for a greater variety of exercises Unique, off-centered design that challenges your entire body during every exercise The option to work slow “grinds” or quick, explosive movements The ability to train a wider range of motion Huge improvement in grip strength
Workout in the privacy of your home and save time travelling to and from the gym Relatively small, easy to store, and portable Train full body strength, endurance, and power all at once Cheaper than a machine and nearly indestructible (no maintenance costs!) Time efficient, full body workouts Target the core muscles with each exercise Blast calories and fat
They strengthen joint tendons and ligaments while providing a cardio workout that is easy on the joints That is, your back side, from head to toe Increases mental focus and coordination Let’s take a look at six different ways you can make your own kettle bell at home, from simplest and inexpensive to methods that require slightly more money and time.
Very easy to make The least expensive DIY kettle bell If you use water, the movement of the water will create a unique challenge as it sloshes around You can easily make two of these kettle bells and have a matching set Not only is it inexpensive and quick to make, but it’s a lighter weight which is great for those new to kettle bells.
If you are travelling and don’t have exercise equipment or access to a gym, this Milk Jug Kettle bell is a great option. Order your kayak dry bag Feel it with water and that's it!
Limited number of exercises due to the structure of the handle. That is, a larger bag would weigh more but would make swinging difficult.
Depending on the size of the bag you purchase, you could fill it with up to 60-70 pounds of water. I would suggest buying a high quality Kayak Dry Bag that would last longer.
Take a piece of rope and tie to each end of the dumbbell’s handle, that's it. Choose the thickness of your handle (rope) to suit the grip size of your hand.
In some ways, the looseness of the rope mimics the instability of a kettle bell. A rope end could easily come loose, or the limp handle may cause an injury.
Make the handle by securing the two 4” pieces of pipe on either side of the “T” fitting. Finish your DIY kettle bell by attaching the floor flange.
The handle may be uncomfortably wide, especially for shorter people as they swing between their legs. This DIY kettle bell will be more expensive if you purchase weight plates.
Gloves are recommended to protect your hands, however they reduce your contact with the kettle bell and increase the chance of blisters when the material gets pinched. If you would rather not wear gloves, you can cover the pipe threading with tape.
Check the T-Handle kettle bell frequently for wear and loose parts. The bottom two elbows allow for more contact area to create a stronger bond in the cement.
Cut your ball open with one six inch slit that has small holes on either side big enough for the pipe handle elbows to fit in easily. This DIY kettle bell is a fixed weight and it is determined by the size of the ball you buy.
Use duct tape to cover one end of your PVC pipe. Heat the PVC pipe in an oven set at 350 °C for a few minutes until it is moldable.
Cut into your basketball ball with a utility knife in a capital “I” shape. Good for long-term use This handle mimics the shape of a real kettle bell and it is smooth on the hands.
When heating the PVC pipe handle in the oven, do not leave it unattended. Now that we’ve looked at several kinds of DIY kettle bells, what it comes down to is personal preference.
If you desire a kettle bell that is easily adjustable, you’ll want to stick with the T-handle with the weight plates. No matter which DIY kettle bell you choose to make, you’ll be saving yourself money while creating an amazing fitness tool.
Even if you would be limited to performing only swings with your make -shift kettle bell, you will still be burning fat, strengthening your muscles, and increasing your endurance in just a few short workouts a week. A kettle bell, whether bought or homemade, is one of the best fitness tool you will ever own.
In this article, we’ll teach you the different ways on how to make homemade kettle bells. DIY kettle bells are also cheap to make so you won’t have to spend too much and you can even use some materials available at home.
If you have a deflated unused basketball at home, you can use it to make your own homemade kettle bell. Making a kettle bell using basketball may take a bit of time and some materials.
Tools Hacksaw or jigsaw Heat gun or oven Bucket Small garden spade A Pair of scissors Use the hacksaw to cut the PVC to a length you’ll be comfortable to hold as a handle.
Another alternative is to wrap it with tin-foil, place it in a baking sheet, and heat it for 350 F for about 10 minutes. Making the Kettle bell Cut the basketball open in a manner where the handle can fit halfway inside.
You can do this by cutting a slit that will make part of the handle fit inside. Once the ball is almost filled, insert the handle at a depth that you will be comfortable to hold at.
After checking everything, wipe excess concrete with a damp cloth and let your homemade kettle bell dry for 24 hours. After 24 hours, do some finishing touches like spray paint or thorough cleaning and you can now use your homemade kettle bell.
Making a homemade kettle bell using a milk jug will only take up 2 to 3 minutes. MaterialsInstructions Fill the empty milk jug with sand or water to add weight to it.
Using sand is better because you might accidentally drop the homemade kettle bell and probably make less of a mess if you use water. Advantages of Using Milk Jug Kettle bell It’s great for beginners as the weight of a milk jug is light compared to other homemade kettle bell alternatives.
It doesn’t cost money at all to make as long as you have a spare milk jug at home. It’s a convenient option especially if you are traveling and don’t want to spend money at the gym to exercise.
The rope is flexible compared to the rigid handle of a kettle bell so it might cause some accidents. Personally, it’s great for light forms of kettle bell workouts because if you’re not careful and the rope loosens then you might have a destroyed appliance at home.
Remember to prioritize safety when making your own homemade kettle bell. In 2018, he received his Pro Card with the Amateur Athletic Union (AAU) in Classic Physique.
While looking for ways to change up our current workout program, I came across the Russian Kettle bell. They provide a great, well-rounded workout for strength training as well fat loss.
I have since built 5 Kettle bells of various weights and have been extremely impressed by the durability of the product as well as the options we now have when working out at home. Kettle bell exercises employ a wider range of motion than traditional dumbbells and typically involves swinging and explosive movements that utilize the full body.
Because the weight is off-center from the handle, the movements demand greater stability and really target the core muscles. Materials: -1 bag quite premixed concrete mix -1 cheap rubber ball (under $5) -26” of 3/4" or 1" PVC (sch40) -Small quantity of sand -Duct tape -Water
Tools: -1 Hacksaw or Jig Saw -1 Heat Gun or Oven -1 Bucket (for mixing) -1 Small Garden Spade or similar tool (for mixing and transferring concrete to the ball) -1 Pair of Scissors The handle used for these Kettle bells is made from PVC pipe which has been heated and bent to form.
I have found that 3/4” PVC (sch 40) has been sufficient for smaller weights (10 – 20 lbs. To save costs on these builds I've begun using PVC Conduit (for electrical installations).
Once packed full, use Duct Tape to seal the other opening of the PVC. Once the PVC has been filled with sand and sealed with Duct tape, it is ready to be heated and formed.
With the oven method, I would wrap the PVC with tin-foil, place it on a baking sheet and heat it at 350F for 10min. NOTE: if you are not happy with the shape of the handle, simply use a heat gun to re-heat the area of concern and re-shape it again.
The ball is being used as a form for the concrete as well as a nice rubber coating for the finished Kettle bell. Be sure to insert the handle as a test to ensure the length of the slit is correct.
Note: This latest build was for the wife (hence the pink & white ball). Add just enough water (a little at a time) to the bucket and mix until the concrete mixture is a thick paste.
Once your Quite is mixed to the correct consistency, use a small garden spade or similar tool to spoon the concrete mixture into the ball. Once the ball is mostly filled, insert your handle and set it to a comfortable depth.
Make sure to shake the ball and lightly tap it on the ground to get the concrete settled to the bottom. Once the ball is filled, check that your handle is still at your desired depth and is also nice and straight.
DIY Kettle bell inspiration credited to Matt Carney on the CrossFit.com forum — (Link)