If you have a deflated unused basketball at home, you can use it to make your own homemade kettle bell. Making a kettle bell using basketball may take a bit of time and some materials.
Tools Hacksaw or jigsaw Heat gun or oven Bucket Small garden spade A Pair of scissors Use the hacksaw to cut the PVC to a length you’ll be comfortable to hold as a handle.
Another alternative is to wrap it with tin-foil, place it in a baking sheet, and heat it for 350 F for about 10 minutes. Making the Kettle bell Cut the basketball open in a manner where the handle can fit halfway inside.
You can do this by cutting a slit that will make part of the handle fit inside. Once the ball is almost filled, insert the handle at a depth that you will be comfortable to hold at.
After checking everything, wipe excess concrete with a damp cloth and let your homemade kettle bell dry for 24 hours. After 24 hours, do some finishing touches like spray paint or thorough cleaning and you can now use your homemade kettle bell.
Making a homemade kettle bell using a milk jug will only take up 2 to 3 minutes. MaterialsInstructions Fill the empty milk jug with sand or water to add weight to it.
Using sand is better because you might accidentally drop the homemade kettle bell and probably make less of a mess if you use water. Advantages of Using Milk Jug Kettle bell It’s great for beginners as the weight of a milk jug is light compared to other homemade kettle bell alternatives.
It doesn’t cost money at all to make as long as you have a spare milk jug at home. It’s a convenient option especially if you are traveling and don’t want to spend money at the gym to exercise.
The rope is flexible compared to the rigid handle of a kettle bell so it might cause some accidents. Personally, it’s great for light forms of kettle bell workouts because if you’re not careful and the rope loosens then you might have a destroyed appliance at home.
Remember to prioritize safety when making your own homemade kettle bell. In 2018, he received his Pro Card with the Amateur Athletic Union (AAU) in Classic Physique.
It is one of the smartest tools you can use to increase strength, cardiovascular capacity, and lose weight. Kettle bell swings are a great way to add in extra exercise if you only have a few minutes.
Or you can perform an entire workout with one kettle bell on the days you can’t make it to the gym. If you’re just starting out or you don’t have much cash, consider making your own kettle bell with items you might already have at home.
DIY kettle bells are easy and cheap to make, you can purchase everything you need at your nearest home improvement store or online. Ok seriously, dumbbells are good and do have their benefits, but a kettle bell can add an extra dimension to your workouts.
They strengthen joint tendons and ligaments while providing a cardio workout that is easy on the joints That is, your back side, from head to toe Increases mental focus and coordination Let’s take a look at six different ways you can make your own kettle bell at home, from simplest and inexpensive to methods that require slightly more money and time.
Very easy to make The least expensive DIY kettle bell If you use water, the movement of the water will create a unique challenge as it sloshes around You can easily make two of these kettle bells and have a matching set Not only is it inexpensive and quick to make, but it’s a lighter weight which is great for those new to kettle bells.
That is, a larger bag would weigh more but would make swinging difficult. The empty, waterproof bag is light and easy to transport.
Depending on the size of the bag you purchase, you could fill it with up to 60-70 pounds of water. I would suggest buying a high quality Kayak Dry Bag that would last longer.
Choose the thickness of your handle (rope) to suit the grip size of your hand. In some ways, the looseness of the rope mimics the instability of a kettle bell.
A rope end could easily come loose, or the limp handle may cause an injury. Make the handle by securing the two 4” pieces of pipe on either side of the “T” fitting.
Secure the longer pipe (8-12” piece) into the vertical end. Finish your DIY kettle bell by attaching the floor flange.
The handle may be uncomfortably wide, especially for shorter people as they swing between their legs. This DIY kettle bell will be more expensive if you purchase weight plates.
Gloves are recommended to protect your hands, however they reduce your contact with the kettle bell and increase the chance of blisters when the material gets pinched. The bottom two elbows allow for more contact area to create a stronger bond in the cement.
Cut your ball open with one six inch slit that has small holes on either side big enough for the pipe handle elbows to fit in easily. Mix cement according to directions and fill ball 3/4 full.
This DIY kettle bell is a fixed weight and it is determined by the size of the ball you buy. Consider what shape you would like your kettle bell to have on the bottom as well as how deep set you want your handle to be.
Use duct tape to cover one end of your PVC pipe. Heat the PVC pipe in an oven set at 350 °C for a few minutes until it is moldable.
Cut into your basketball ball with a utility knife in a capital “I” shape. Good for long-term use This handle mimics the shape of a real kettle bell and it is smooth on the hands.
When heating the PVC pipe handle in the oven, do not leave it unattended. Now that we’ve looked at several kinds of DIY kettle bells, what it comes down to is personal preference.
Do you want to work with cement or would you prefer the simplicity of water or sand? If you desire a kettle bell that is easily adjustable, you’ll want to stick with the T-handle with the weight plates.
No matter which DIY kettle bell you choose to make, you’ll be saving yourself money while creating an amazing fitness tool. Even if you would be limited to performing only swings with your make-shift kettle bell, you will still be burning fat, strengthening your muscles, and increasing your endurance in just a few short workouts a week.
I knew they did not own a kettlebell, so I recommended using an old milk jug filled with sand or even a laundry detergent canister for the swings. I brought a long with me, as I always do when I travel by car, two kettle bells and a speed rope (just in case).
Use duct tape to widen diameter and dampen the noise. Like I said there are more elaborate versions you could create, but this is quick, easy and cheap.